INPUT TYPE: DC Voltage,1-5V,Thermocouple,RTD,On/Off DI and Dc current
RANGES: DC Voltage 20mA to 50V ,1 to 5V
TC: R ,S,B,K,E,J,T,N,W,L,U type
RTD: 200 to 600 Deg
No of Channels: 2 – 48
Communication: TCP/IP,RS 485/232
Power supply: 230 V Ac/ 24 V Dc
INPUT TYPE: DC Voltage,1-5V,Thermocouple,RTD,On/Off DI and Dc current
RANGES: DC Voltage 20mA to 50V ,1 to 5V
TC: R ,S,B,K,E,J,T,N,W,L,U type
RTD: 200 to 600 Deg
No of Channels: 2 – 48
Communication: TCP/IP,RS 485/232
Power supply: 230 V Ac/ 24 V Dc
Measuring Range: -30 to 70 Deg.C , 0 – 100% RH
Accuracy: +-0.5Deg.C,+-3%RH
Resolution: 0.1 Deg.C , 1% RH
Communication interface: Build in USB 2.0
Temperature measuring range: -40C~85C
Temperature accuracy: ±0.5C(-20 C~40C; ±0.1C(other)
Humidity range: 10%~99%
Humidity accuracy: ±3%RH(25C,20%~90%RH); ±5%RH(other)
Resolution: temperature 0.1C, humidity 0.1%RH
Data interface: USB
Gases detected Combustible gases | Oxygen | Hydrogen sulfide | Carbon monoxide
Detection principle Catalytic combustion | Galvanic cell | Electro-chemical cell
Detection range 0～100％LEL | 0～40.0％ | 0～100.0ppm | 0～500ppm
Increments 1%LEL | 0.1% | 0.5ppm | 1ppm
Preset alarms 1st 10%LEL, 2nd：50%LEL, OVER：100%LEL, 1st：19.5%, 2nd：18.0%, OVER：40.0% | 1st：5.0ppm, 2nd：30.0ppm, STEL：5.0ppm, TWA：5.0ppm, OVER：100.0ppm | 1st：25ppm, 2nd：50ppm, STEL：200ppm, TWA：25ppm, OVER：500ppm
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Power 1 LED, Red
Digital Input and Output 4 Green LEDs for
Digital Input & 4 Red LEDs for Relay Output
Power supply: 10 – 40 Vdc
Power consumption: 28 mA
Maximum current load: 3A
Current-overload protection: must be protected with a 5A fuse by you
Number of switching units: 10 relays, potential free contacts (dry contacts)
Type of switching units: relays
Number of PCBs: 1 (max. 16 without enclosure/on DIN-rail)
Power consumption per PCB: 28mA
Antenna + connector: 868 Mhz antenna with BNC connector
Digital outputs:10 relays, potential free contacts, max. 3A
Digital inputsup to 8 per PLC, 10 – 40 Vdc
Output power 250mW
Range: 2 miles
Data rate Up to 1Mbps RF
Multiple antenna options
Agency Approvals: FCC and IC
Powerful Atmel 256k ATXMEGA256A3 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
Output power 250mW
Range: 2 miles
Data rate Up to 1Mbps RF
Multiple antenna options
Agency Approvals: FCC and IC
Powerful Atmel 256k ATXMEGA256A3 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
Power supply: 10 – 40 Vdc
Power consumption: 28 mA
Maximum current load: 3A
Current-overload protection: must be protected with a 5A fuse by you
Number of switching units: 10 relays, potential free contacts (dry contacts)
Type of switching units: relays
Number of PCBs: 1 (max. 16 without enclosure/on DIN-rail)
Power consumption per PCB: 28mA
Antenna + connector: 868 Mhz antenna with BNC connector
Digital outputs:10 relays, potential free contacts, max. 3A
Digital inputsup to 8 per PLC, 10 – 40 Vdc
Output power 250mW
Range: 2 miles
Data rate Up to 1Mbps RF
Multiple antenna options
Agency Approvals: FCC and IC
Powerful Atmel 256k ATXMEGA256A3 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Power 1 LED, Red
Digital Input and Output 4 Green LEDs for
Digital Input & 4 Red LEDs for Relay Output
Power supply: 10 – 40 Vdc
Power consumption: 28 mA
Maximum current load: 3A
Current-overload protection: must be protected with a 5A fuse by you
Number of switching units: 10 relays, potential free contacts (dry contacts)
Type of switching units: relays
Number of PCBs: 1 (max. 16 without enclosure/on DIN-rail)
Power consumption per PCB: 28mA
Antenna + connector: 868 Mhz antenna with BNC connector
Digital outputs:10 relays, potential free contacts, max. 3A
Digital inputsup to 8 per PLC, 10 – 40 Vdc
Output power 250mW
Range: 2 miles
Data rate Up to 1Mbps RF
Multiple antenna options
Agency Approvals: FCC and IC
Powerful Atmel 256k ATXMEGA256A3 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Power 1 LED, Red
Digital Input and Output 4 Green LEDs for
Digital Input & 4 Red LEDs for Relay Output
Power supply: 10 – 40 Vdc
Power consumption: 28 mA
Maximum current load: 3A
Current-overload protection: must be protected with a 5A fuse by you
Number of switching units: 10 relays, potential free contacts (dry contacts)
Type of switching units: relays
Number of PCBs: 1 (max. 16 without enclosure/on DIN-rail)
Power consumption per PCB: 28mA
Antenna + connector: 868 Mhz antenna with BNC connector
Digital outputs:10 relays, potential free contacts, max. 3A
Digital inputsup to 8 per PLC, 10 – 40 Vdc
Output power 250mW
Range: 2 miles
Data rate Up to 1Mbps RF
Multiple antenna options
Agency Approvals: FCC and IC
Powerful Atmel 256k ATXMEGA256A3 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
Gases detected Combustible gases | Oxygen | Hydrogen sulfide | Carbon monoxide
Detection principle Catalytic combustion | Galvanic cell | Electro-chemical cell
Detection range 0～100％LEL | 0～40.0％ | 0～100.0ppm | 0～500ppm
Increments 1%LEL | 0.1% | 0.5ppm | 1ppm
Preset alarms 1st 10%LEL, 2nd：50%LEL, OVER：100%LEL, 1st：19.5%, 2nd：18.0%, OVER：40.0% | 1st：5.0ppm, 2nd：30.0ppm, STEL：5.0ppm, TWA：5.0ppm, OVER：100.0ppm | 1st：25ppm, 2nd：50ppm, STEL：200ppm, TWA：25ppm, OVER：500ppm
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Power 1 LED, Red
Digital Input and Output 4 Green LEDs for
Digital Input & 4 Red LEDs for Relay Output
Power supply: 10 – 40 Vdc
Power consumption: 28 mA
Maximum current load: 3A
Current-overload protection: must be protected with a 5A fuse by you
Number of switching units: 10 relays, potential free contacts (dry contacts)
Type of switching units: relays
Number of PCBs: 1 (max. 16 without enclosure/on DIN-rail)
Power consumption per PCB: 28mA
Antenna + connector: 868 Mhz antenna with BNC connector
Digital outputs:10 relays, potential free contacts, max. 3A
Digital inputsup to 8 per PLC, 10 – 40 Vdc
Output power 250mW
Range: 2 miles
Data rate Up to 1Mbps RF
Multiple antenna options
Agency Approvals: FCC and IC
Powerful Atmel 256k ATXMEGA256A3 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
Temperature measuring range: -40C~85C
Temperature accuracy: ±0.5C(-20 C~40C; ±0.1C(other)
Humidity range: 10%~99%
Humidity accuracy: ±3%RH(25C,20%~90%RH); ±5%RH(other)
Resolution: temperature 0.1C, humidity 0.1%RH
Data interface: USB
Gases detected Combustible gases | Oxygen | Hydrogen sulfide | Carbon monoxide
Detection principle Catalytic combustion | Galvanic cell | Electro-chemical cell
Detection range 0～100％LEL | 0～40.0％ | 0～100.0ppm | 0～500ppm
Increments 1%LEL | 0.1% | 0.5ppm | 1ppm
Preset alarms 1st 10%LEL, 2nd：50%LEL, OVER：100%LEL, 1st：19.5%, 2nd：18.0%, OVER：40.0% | 1st：5.0ppm, 2nd：30.0ppm, STEL：5.0ppm, TWA：5.0ppm, OVER：100.0ppm | 1st：25ppm, 2nd：50ppm, STEL：200ppm, TWA：25ppm, OVER：500ppm
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Power 1 LED, Red
Digital Input and Output 4 Green LEDs for
Digital Input & 4 Red LEDs for Relay Output
Power supply: 10 – 40 Vdc
Power consumption: 28 mA
Maximum current load: 3A
Current-overload protection: must be protected with a 5A fuse by you
Number of switching units: 10 relays, potential free contacts (dry contacts)
Type of switching units: relays
Number of PCBs: 1 (max. 16 without enclosure/on DIN-rail)
Power consumption per PCB: 28mA
Antenna + connector: 868 Mhz antenna with BNC connector
Digital outputs:10 relays, potential free contacts, max. 3A
Digital inputsup to 8 per PLC, 10 – 40 Vdc
Output power 250mW
Range: 2 miles
Data rate Up to 1Mbps RF
Multiple antenna options
Agency Approvals: FCC and IC
Powerful Atmel 256k ATXMEGA256A3 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
Measuring Range: -30 to 70 Deg.C , 0 – 100% RH
Accuracy: +-0.5Deg.C,+-3%RH
Resolution: 0.1 Deg.C , 1% RH
Communication interface: Build in USB 2.0
Temperature measuring range: -40C~85C
Temperature accuracy: ±0.5C(-20 C~40C; ±0.1C(other)
Humidity range: 10%~99%
Humidity accuracy: ±3%RH(25C,20%~90%RH); ±5%RH(other)
Resolution: temperature 0.1C, humidity 0.1%RH
Data interface: USB
Gases detected Combustible gases | Oxygen | Hydrogen sulfide | Carbon monoxide
Detection principle Catalytic combustion | Galvanic cell | Electro-chemical cell
Detection range 0～100％LEL | 0～40.0％ | 0～100.0ppm | 0～500ppm
Increments 1%LEL | 0.1% | 0.5ppm | 1ppm
Preset alarms 1st 10%LEL, 2nd：50%LEL, OVER：100%LEL, 1st：19.5%, 2nd：18.0%, OVER：40.0% | 1st：5.0ppm, 2nd：30.0ppm, STEL：5.0ppm, TWA：5.0ppm, OVER：100.0ppm | 1st：25ppm, 2nd：50ppm, STEL：200ppm, TWA：25ppm, OVER：500ppm
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Power 1 LED, Red
Digital Input and Output 4 Green LEDs for
Digital Input & 4 Red LEDs for Relay Output
Power supply: 10 – 40 Vdc
Power consumption: 28 mA
Maximum current load: 3A
Current-overload protection: must be protected with a 5A fuse by you
Number of switching units: 10 relays, potential free contacts (dry contacts)
Type of switching units: relays
Number of PCBs: 1 (max. 16 without enclosure/on DIN-rail)
Power consumption per PCB: 28mA
Antenna + connector: 868 Mhz antenna with BNC connector
Digital outputs:10 relays, potential free contacts, max. 3A
Digital inputsup to 8 per PLC, 10 – 40 Vdc
Output power 250mW
Range: 2 miles
Data rate Up to 1Mbps RF
Multiple antenna options
Agency Approvals: FCC and IC
Powerful Atmel 256k ATXMEGA256A3 with 802.15.4 MAC or ZigBee Stack
LSR serial interface based on 802.15.4 MAC
INPUT TYPE: DC Voltage,1-5V,Thermocouple,RTD,On/Off DI and Dc current
RANGES: DC Voltage 20mA to 50V ,1 to 5V
TC: R ,S,B,K,E,J,T,N,W,L,U type
RTD: 200 to 600 Deg
No of Channels: 2 – 48
Communication: TCP/IP,RS 485/232
Power supply: 230 V Ac/ 24 V Dc
Measuring Range: -30 to 70 Deg.C , 0 – 100% RH
Accuracy: +-0.5Deg.C,+-3%RH
Resolution: 0.1 Deg.C , 1% RH
Communication interface: Build in USB 2.0
Temperature measuring range: -40C~85C
Temperature accuracy: ±0.5C(-20 C~40C; ±0.1C(other)
Humidity range: 10%~99%
Humidity accuracy: ±3%RH(25C,20%~90%RH); ±5%RH(other)
Resolution: temperature 0.1C, humidity 0.1%RH
Data interface: USB
Gases detected Combustible gases | Oxygen | Hydrogen sulfide | Carbon monoxide
Detection principle Catalytic combustion | Galvanic cell | Electro-chemical cell
Detection range 0～100％LEL | 0～40.0％ | 0～100.0ppm | 0～500ppm
Increments 1%LEL | 0.1% | 0.5ppm | 1ppm
Preset alarms 1st 10%LEL, 2nd：50%LEL, OVER：100%LEL, 1st：19.5%, 2nd：18.0%, OVER：40.0% | 1st：5.0ppm, 2nd：30.0ppm, STEL：5.0ppm, TWA：5.0ppm, OVER：100.0ppm | 1st：25ppm, 2nd：50ppm, STEL：200ppm, TWA：25ppm, OVER：500ppm
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (FCC Certificated)
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Certification CE/FCC, FCC ID
Power 1 LED, Red
Digital Input and Output 4 Green LEDs for
Digital Input & 4 Red LEDs for Relay Output
Power supply: 10 – 40 Vdc
Power consumption: 28 mA
Maximum current load: 3A
Current-overload protection: must be protected with a 5A fuse by you
Number of switching units: 10 relays, potential free contacts (dry contacts)
Type of switching units: relays
Number of PCBs: 1 (max. 16 without enclosure/on DIN-rail)
Power consumption per PCB: 28mA
Antenna + connector: 868 Mhz antenna with BNC connector
Digital outputs:10 relays, potential free contacts, max. 3A
Digital inputsup to 8 per PLC, 10 – 40 Vdc
